The Aquanello Eterna wall-mounted cold-water fountain faucet in PVD copper (ET4003-62) is a compact and minimalist wall-mounted faucet designed for a restroom fountain or small sink. The faucet is connected directly to the wall, leaving the fountain or sink free of a faucet hole and creating an exceptionally sleek look.
The visible metal parts are made of stainless steel as the base material and feature a high-quality copper-colored PVD finish. This combines the solid stainless steel construction with a warm, distinctive copper color and a strong, wear-resistant, and durable surface finish.
The ET4003-62 is specifically designed as a cold-water faucet and connects to a single cold-water supply line.
Wall-mounted cold-water faucet
The Aquanello Eterna ET4003-62 is intended for restroom facilities where only cold water is required.
The faucet is suitable for, among other things:
- Toilet sinks
- Guest bathrooms
- Small sinks
- Minimalist wall-mounted installations
- Restrooms with cold-water-only connections
The faucet does not mix hot and cold water. The integrated control allows you to easily turn the cold water on, off, and adjust the flow.
Sleek wall-mounted design
The ET4003-62 is mounted directly against the wall. This eliminates the need for a faucet hole in the sink, washbasin, or countertop.
The water supply is located behind the wall, and the connection is neatly concealed behind the round cover rosette. As a result, only the essential faucet components remain visible, creating a calm and minimalist sink setup.
Spout length of approximately 100 mm
The wall-mounted fountain faucet has a spout length of approximately 100 mm. This directs the water stream from the wall toward the fountain or sink.
The curved spout has a diameter of approximately Ø24 mm and slopes downward at an angle of approximately 35°.
By carefully aligning the faucet’s position with the basin during installation, the water stream can be optimally directed into the basin.
Compact design, approximately 74 mm high
The total height of the faucet is approximately 74 mm. This keeps the design compact against the wall, and the faucet takes up minimal visual space.
The combination of the short projection, rounded shapes, and integrated controls makes the ET4003-62 particularly suitable for smaller restrooms.
G1/2 wall connection
The ET4003-62 is equipped with a standard G1/2 wall connection. This allows the faucet to be connected to a standard cold-water system.
After installation, the technical connection is neatly concealed behind the round cover plate.
Round cover rosette, approximately Ø55 mm
The wall connection is finished with a round rosette with a diameter of approximately Ø55 mm.
The round shape perfectly complements the cylindrical design style of the Aquanello Eterna series and ensures a clean transition between the faucet and the wall.
Stainless steel base with copper-colored PVD finish
The visible metal parts are made of stainless steel as the base material. A high-quality copper-colored PVD coating is then applied to this base.
This combines the strength and durability of stainless steel with the warm, high-quality appearance of copper.
Durable PVD technology
The copper-colored finish is applied using PVD (Physical Vapor Deposition) technology. In this process, a very thin yet hard decorative layer is applied to the stainless steel surface.
PVD is known for its excellent wear resistance, strong adhesion, and color stability under normal use. This makes this surface treatment particularly suitable for plumbing fixtures and faucets that are used daily.
The copper-colored PVD layer adheres strongly to the underlying stainless steel and forms a durable surface finish that withstands daily use better than many conventional decorative coatings.
Advantages of PVD
- Good wear resistance: suitable for daily use
- Strong adhesion: the PVD coating adheres firmly to the stainless steel surface
- Color stability: designed to maintain the copper-colored appearance over the long term
- Durable surface finish: highly resistant to normal daily use
- Luxurious appearance: warm and distinctive copper color
- Stainless steel base material: strong and durable foundation
To preserve the PVD finish, we recommend cleaning the faucet with a soft cloth and a mild detergent. Avoid abrasive sponges and harsh, highly acidic, or alkaline cleaning products.
No faucet hole required in the sink
A key advantage of wall mounting is that the sink itself does not require a faucet hole.
This allows for a sleek sink top or a minimalist basin, with the faucet supplied entirely from the wall.
Minimalist Eterna design
The Aquanello Eterna series is characterized by rounded shapes, cylindrical components, and minimalist details. The ET4003-62 follows the same design style with a compact round rosette, curved spout, and subtle controls.
The copper-colored PVD finish enhances the warm and luxurious character and pairs beautifully with materials such as:
- Travertine
- Marble
- Natural stone
- Concrete-look
- Wood and wood-look finishes
- Light Ceramic
Key features
- Brand: Aquanello
- Series: Eterna
- Model: ET4003-62
- Product Type: Wall-mounted sink faucet / cold-water faucet
- Color: Copper
- Base material: Stainless steel
- Finish: Copper-colored PVD finish
- Finish properties: Wear-resistant, highly adhesive, and color-stable under normal use
- Water connection: Cold water
- Mixing faucet: No
- Thermostatic: No
- Installation: Wall-mounted
- Spout length: approx. 100 mm
- Total height: approx. 74 mm
- Spout diameter: approx. Ø24 mm
- Spout angle: approx. 35° downward
- Wall connection: G1/2
- Cover plate diameter: approx. Ø55 mm
- Operation: Manual
- Self-closing: No
- Application: Toilet fountain / small sink
- Style: Luxury / modern / minimalist
- Warranty: 5 years
Luxury wall-mounted faucet in PVD copper
The Aquanello Eterna ET4003-62 is a stylish solution for those who want to install a compact cold-water faucet flush against the wall.
The combination of the 100 mm spout, G1/2 wall connection, Ø55 mm cover rosette, stainless steel base material, and durable copper-colored PVD finish results in a high-quality, minimalist wall-mounted faucet.
An elegant choice for a modern restroom where a sleek wall-mounted design is combined with the warm and distinctive look of PVD copper.
AquanelloArticle Number 1208973298
